국제논문
**논문의 제1저자 또는 교신저자인 경우는 밑줄로 표시되었음.
1. Yeo Kyung Kang, Mun Hee Kim, Jae Won Kim, Trinh Ngoc Tien, Dohyung Lim, Heoung-Jae Chun, “Analysis on wear phenomenon of artificial knee joint based on FEM and mechanical test,” International Journal of Precision Engineering and Manufacturing, 19(8), 1211-1217, 2018
2. S. M. Hasheminia, G. H. Baradaran, Heoung-Jae Chun, “Nonlinear finite element modeling of large deformation of nanobeams”, Acta Mechanica, 229(1), 21-32, 2018
3. Jae-Il Choi, S.M. Mohammad, Heoung-Jae Chun, Jong-Chan Park, Hong-Suk Chang, “Failure Load Prediction of Composite Bolted Joint with Clamping Force”, Composite Structures, 189, 247-255, 2018
4. Ho-Joong Kim, Oh-Hyo Kwon, Bong-Soon Chang, Choon-Ki Lee, Heong-Jae Chun, Jin S. Yeom, “Change in pain catastrophizing in patients with lumbar spinal surgery”, The Spine Journal, 18(1), 115-121, 2018
5. J Shen, HJ Kim, NK Lee, Heoung-Jae Chun, BS Chang, CK Lee, JS Yeom, “The influence of hand grip strength on surgical outcomes after surgery for degenerative lumbar spinal stenosis: a preliminary result,” Spinal Journal, Article in Press, 2018
6. K.Y. Kim, Heoung-Jae Chun, Kyoung Tak Kang, Ic Pyo Hong, KYungwon Lee, M.K. Lee, “Thermal residual stresses in FSS layer embedded composite plates in co-cure bonding”, Advanced Composite Materials, 26(6), 511-536, 2017
7. Dongchan Son, Hokeun Shin, Yoon Jae Kim, Ic Pyo Hong, Heoung-Jae Chun, Yong Bae Park, “Design and Fabrication of a Reconfigurable Frequency Selective Surfave using Fluidic Channels”, journal of Electrical Engineering & Technology, 12(6), 2342-2347, 2017
8. In Gon Lee, Yong Bae Park, Heoung-Jae Chun, Yoon Jae Kim, Ic Pyo Hong, “Design of active frequency selective surface with curved composite structures and tunable frequency response”, International Journal of Antennas and Propagaion, 2017(6307528), 2017
9. Kyoung-Tak Kang, Sung-Hwan Kim, Juhyun Son, Young Han Lee, Shinil Kim, Heoung-Jae Chun, “Probabilistic evaluation of the material properties of the in vivo subject-specific articular surface using a computational model”, Journal of Biomedical Materials Research Part B-Applied Biomaterials, 105(6), 1390-1400, 2017
10. Jae-Il Choi, S.M. Hasheminia, Heoung-Jae Chun, Jong-Chan Park, “Experimental Study on Failure Mechanism of Hybrid Composite Joint with Different Adhesives”, Fibers and Polymers, 18(3), 569-574, 2017
11. Kyoung-Tak Kang, Sung-Hwan Kim, Juhyun Son, Young Han Lee, Heoung-Jae Chun, “Computational model-based probabilistic analysis of in vivo material properties for ligament stiffness using the laxity test and computed tomography”, Journal of Materials Science-Materials in Medicine, 27(12), 183, 2016
12. Youngjune Jang, Hyoung-Taek Hong, Heoung-Jae Chun, Byoung-Duck Roh, “Influence of Dentoalveolar Ankylosis on the Biomechanical Response of a Single-rooted Tooth and Surrounding Alveolar Bone: A 3-dimensional Finite Element Analysis”, Journal of Endodontics, 42(11), 1687-1692, 2016
13. In-Gon Lee, Yoon-Jae Kim, Yong-Bae Park, Heoung-Jae Chun, Ic-Pyo Hong, “Design of X-band Reconfigurable Frequency Selective Surface with High Isolation”, IEICE Electronics Express, 13(16), 1-8, 2016
14. Yi-Ru Jeong, Ic-Pyo Hong, Heoung-Jae Chun, Yong Bae Park, Yoon Jae Kim and Jong-Gwan Yook, “Fast scattering analysis over a wide frequency band using Clenshaw-Lord-type Pade-Chebyshev approximation”, IET Microwaves, Antennas & Propagation, 2016
15. In-Han Hwang, Heoung-Jae Chun, Ik-Pyo Hong, Yong-Bae Park, Yoon-Jae Kim, “Change of transmission characteristics of FSSs in hybrid composites due to residual stresses”, Steel and Composite Structures, 19(6), 1501-1510, 2015
16. Kyoung-Tak Kang, Sung-Hwan Kim, Juhyun Son, Young Han Lee, and Heoung-Jae Chun, “Probabilistic approach for determining the material properties of meniscal attachments in vivo using magnetic resonance imaging and a finite element model”, Journal of Computational Biology, 2015
17. Kyoung-Tak Kang, Sung-Hwan Kim, Juhyun Son, Young Han Lee, Heoung-Jae Chun, “In Vivo Evaluation of the Subject-Specific Finite Element Model for Knee Joint Cartilage Contact Area”, International journal of precicion engineering and manufacturing, 16(6), 1171-1177, 2015
18. Ho-Joong Kim, Kyoung-Tak Kang, Heoung-Jae Chun, Choon-Ki Lee, Bong-Soon Chang, Jin-S Yeom, “The influence of intrinsic disc degeneration of the adjacent segments on its stress distrbution after one-level lumbar fusion”, European Spine Journal, 24(4), 827-837, 2015
19. Jang, Y., Hong, H. T., Chun, H. J., & Roh, B. D., “Influence of Apical Root Resection on the Biomechanical Response of a Single-rooted Tooth?Part 2: Apical Root Resection Combined with Periodontal Bone Loss.”, Journal of endodontics. 2015
20. Kang, K. T., Kim, H. J., Son, J., Yeom, J. S. Chun, H. J., “Comparing an instrumented posterior fixation system with rigid and semi-flexible rods using finite element analysis.”, International Journal of Precision Engineering and Manufacturing, 16(1), 163-170, 2015
21. Park, K. M., Seo, Y. S., Chun, H. J., Hong, I. P., Park, Y. B., & Kim, Y. J., “Residual stress and electromagnetic characteristics in loop type frequency selective surface embedded hybrid structures.”, Journal of Mechanical Science and Technology, 29(1), 99-102. 2015
22. Kim, H. J., Chun, H. J., Kang, K. T., Lee, H. M., Chang, B. S., Lee, C. K., & Yeom, J. S. “Finite Element Analysis for Comparison of Spinous Process Osteotomies Technique with Conventional Laminectomy as Lumbar Decompression Procedure. Yonsei medical journal”, 56(1), 146-153, 2015
23. Jeong, Y. R., Hong, I. P., Chun, H. J., Park, Y. B., Kim, Y. J., & Yook, J. G. “Scattering analysis of curved FSS using Floquet harmonics and asymptotic waveform evaluation technique.”, STEEL AND COMPOSITE STRUCTURES, 17(5), 561-572, 2014
24. Young-june Jang, Hyoung-Taek Hong, Byoung-Duck Roh, Heoung-Jae Chun, "Influence of Apical Root Resection on the Biomechanical Response of a Single-rooted Tooth: A 3-dimensional Finite Element Analysis", Journal of Endodontics, Vol. 40, No. 9, pp. 1489-1493, 2014
25. Ji-Hyung Kim, Heoung-Jae Chun, Ic-Pyo Hong, Yoon-Jae Kim, Yong-Bae Park, "Analysis of FSS radomes based on physical optics method and ray tracing technique", IEEE Antennas and Wireless Propagation Letters, Vol 13, pp. 868-871, 2014
26. Hyoung-Taek Hong, Heoung-Jae Chun, Heung-Soap Choi, "Optimal strength design of composite Bicycle wheels", International Journal of Precision Engineering and Manufacturing, Vol. 15, No. 8, pp. 1609-1613, 2014
27. Yi-Ru Jeong, Ic-Pyo Hong, Heoung-Jae Chun, Jong-Gwan Yook, "Transmission characteristics of a composite made with ground granulated blast furnace slag", IEICE Electronics Express, Vol 11, No.2, 20130855-20130855, 2014
28. Heoung-Jae Chun, Ju-hyun Son, Kyoung-tak Kang, Jun-hyung Byun, Moon-kwang Um, Sang-kwan Leem "Prediction of elastic properties for woven z-pinned composites", Composite Part B Engineering, Vol 64. pp 59-71, 2014
외 53편
국내 논문
1. 노 태 헌, 전 흥 재, “반치환 무릎 인공관절에서의 재료조합에 따른 접촉압력 분석”, 한국전산구조공학회 논문집, 2017 (accepted)
2. 정 도 윤, 전 흥 재, “요추전산모델의 해부학적 형상에 대한 통계학적 분석”, 대한기계학회 논문집 B권, 2017
3. Yun-Seok Seo, Heoung-Jae Chun, Ic-Pyo Hong, Young-Bae Park, Yoon-Jae Kim, “Fabrication of hybrid composite plates with an active frequency selective surface’, Composites Research, 30(5), pp. 273-279, 2017
4. 이 인 곤, 박 찬 선, 육 종 관, 박 용 배, 전 흥 재, 김 윤 재, 홍 익 표, “유연한 구조를 갖는 X-Band 재구성 주파수 선택구조 설계”, 한국전자파학회지, 28(1), pp. 80-83, 2017
5. 백 설, 강 경 탁, 이 진 아, 전 흥 재, “굽힘 하중을 받는 복합재 기계적 체결부의 강도예측에 관한 연구”, Composites Research, 27(6), pp. 213-218, 2014
6. 이 인 곤, 홍 익 표, 서 윤 석, 전 흥 재, 박 용 배, 조 창 민, “패치 배열과 그리드 구조를 이용한 재구성 주파수 선택 구조 설계”, 한국전자파학회지, 25(1), pp. 92-98, 2014
7. 이 인 곤, 홍 익 표, 전 흥 재, 박 용 배, 김 윤 재, “곡면 재구성 주파수 선택막의 투과특성”, 군사과학기술학회, 37(3), pp. 311-317, 2014
8. 남 지 훈, 전 흥 재, 홍 익 표, “슬래그 입자의 크기 및 체적비에 따른 슬래그 입자강화 복합재료의 기계적 특성 연구”, 26(4), pp.218-222, 2013
9. 홍 형 택, 전 흥 재, “치조골흡수 유형에 따른 치근단 절제술의 수술적 평가에 관한 연구”, 한국전산구조공학회지, 26(6), pp. 471-474, 2013
10. 박 경 미, 서 윤 석, 전 흥 재, 홍 익 표, 박 용 배, 김 윤 재, “주파수 선택막이 삽입된 복합재 평판의 잔류 열응력과 스프링 백 효과”, 한국전산구조공학회지, 26(6), pp. 475-481, 2013
11. 박 경 미, 황 인 한, 전 흥 재, 홍 익 표, 박 용 배, 김 윤 재, “N-pole 종류의 FSS가 결합된 복합재료 구조의 잔류응력과 전파투과특성”, 한국전산구조공학회지, 26(2), pp. 123-130, 2013
12. 이 진 아, 홍 형 택, 전 흥 재, “복합재료 라미네이트 경량화 자전거 프레임의 강도 설계”, 대한기계학회 논문집 A, 제 37권, 2호, pp. 265-270, 2013
13. 이 진 아, 홍 형 택, 강 경 탁, 전 흥 재, “적층각을 고려한 복합재료 라미네이트 자전거 휠의 설계”, 한국복합재료학회지, 제 25권, 5호, pp. 141-146, 2012
14. 정 이 루, 홍 익 표, 이 명 건, 전 흥 재, 육 종 관, “구형 유전체 위에 있는 구형 패치의 공진 특성과 방사 특성“, 한국전자파학회논문지, 23(4), PP.515-523, 2012
15. 홍 익 표, 전 흥 재, 이 명 건, 정 용 식, “유한크기 FSS의 곡률효과에 따른 주파수 특성 해석”, 군사과학기술학회지, 15(6), pp. 77-798, 2012
16. Kyoung-Tak Kang, Heoung-Jae Chun, Ho-Joong Kim, Jin-S. Yeom, Kyoung-Mi Park, In-Han Hwang, Kwang-Il Lee, “Finite Element Analysis of Instrumented Posterior Lumbar Interbody Fusion Cages for Reducing Stress Shileding Effects : Comparison of the CFRP cage and Titanium cage”, Journal of Koream Society for Composite Materials, 25(4), pp. 98-104, 2012
외 35편 |
